200W LED Floodlight 27000LM 3000K Warm White IP65 Outdoor Security Light

HE PRO 200W Dimmable LED Floodlight Powerful professional-grade LED floodlight designed for illuminating large indoor and outdoor areas. This LP704 unit uses an integrated 200W LED light source producing approximately 27,000 lumens with a warm-white output of approximately 3000K. The physical product label specifies a warm-white range of 2800–3200K, making it particularly suitable where a softer, warmer light is preferred over the blue-white appearance of typical 6000–6500K security floodlights C103461 specification lists 27,000 lumens and 3000K warm white. Dimmable Unlike many high-powered LED floodlights, this HE PRO model is dimmable. The matching specification identifies the dimming system as TRIAC, allowing light output to be controlled when installed with a suitable compatible LED dimmer. Please ensure any dimming equipment used is appropriate for a 200W LED load. Wide 120° beam The floodlight uses a wide 120° beam angle, making it suitable for illuminating large open areas rather than producing a narrow spotlight. The wide distribution makes it suitable for areas such as yards, driveways, commercial premises, workshops, warehouses, façades and large outdoor spaces. Warm white 3000K Colour temperature: Approximately 3000K Warm White Physical product label: WW 2800–3200K Warm white light produces a softer appearance than conventional cool-white industrial floodlights and can work particularly well around buildings, architectural façades and outdoor areas where a less harsh light is preferred. Weather resistant IP65 rated The housing is designed to resist dust and water ingress for outdoor applications. The matching product specification also gives an IK08 impact rating. High-efficiency LED design Technical data for this product gives: Power: 200W Light output: Approx. 27,000 lumens LED performance: 145 lm/W Luminous efficiency: 135 lm/W Power factor: 0.96 CRI: 80 LEDs: 384 × LUMILEDS SMD2835 Expected operating life: Approx. 50,000 hours Heavy-duty aluminium heatsink The rear of the floodlight incorporates a large finned aluminium heatsink designed to dissipate heat from the LED and driver assembly. The deep cooling fins are clearly visible in the actual product photographs. The body is finished in black and uses an aluminium-and-glass construction. Adjustable mounting bracket A heavy-duty U-shaped mounting bracket is already fitted to the floodlight. The angle of the fitting can be adjusted at the side mounting points, allowing the light to be aimed at the required area. Suitable fixings for the mounting surface should always be selected according to the construction and condition of the wall or structure. Electrical specification Input: 220–240V AC Frequency: 50–60Hz Power: 200W Current shown on physical label: 880mA Electrical protection class: Class I Dimming: TRIAC / compatible LED dimmer Earth connection: Required The floodlight is supplied with a pre-wired mains cable. What's included 1 × HE PRO 200W LED Floodlight 1 × Pre-fitted adjustable U-bracket 1 × Pre-wired power cable No wall fixings, external junction box, dimmer switch or other accessories are included unless specifically shown in your actual photographs. Applications Suitable applications include large gardens and yards, driveways, building façades, warehouses, workshops, industrial areas, commercial premises, loading areas, car parks, signage and general security/area lighting. The supplier specifically markets the HE PRO range for outdoor use and large-area illumination. Installation & safety This is a 220–240V mains electrical product. The electrical supply must be isolated before installation, maintenance or adjustment. Because the floodlight uses a Class I earthed supply, it must be correctly connected to live, neutral and earth. If you are not suitably competent to install mains electrical equipment, installation should be completed by a qualified electrician. For outdoor installations, all external connections and junctions must also be made using appropriately rated weather-resistant equipment. Important buyer information 200W integrated LED — no replaceable household bulb is required. Warm White: approximately 3000K / label states 2800–3200K. Dimmable: requires a suitable compatible LED dimmer. IP65: suitable for outdoor applications when correctly installed. PIR sensor: not included. This is not a solar or battery-powered floodlight. Hardwired 220–240V AC mains connection. Delivery FREE UK TRACKED DELIVERY Orders are normally dispatched within 1 working day. Items will be carefully packaged to protect the wire cage, white globe and electrical components during transit. A tracked delivery service will be used. Tracking information will be uploaded to your eBay order after dispatch. For multiple purchases we may use an alternative tracked courier where this provides safer or more suitable transport. Returns 30-day returns accepted. For ordinary change-of-mind returns, buyer pays return postage. If the product arrives damaged, defective or materially different from the listing, handle the return through eBay in accordance with the buyer's statutory rights. Because this is relatively heavy electrical equipment please retain the original packaging until you have inspected and tested the fitting.